Universal anti-theft complex. Easily installed on most automobile models of the leading foreign and domestic manufacturers.

Anti-theft PRO2 complex is a distributed modular system with unified control of the modules via digital MULT bus.

System configuration is formed individually, taking into account the model of a car, which allows to implement the full range of security and service functions in the most efficient way, taking into account the specific features of the model.

Commands transmission from the remote control is protected by a dynamic code, resistant to scanning and hacking.

 
Remote control is performed in original «All metal» design, and with the cap closed looks like   an ordinary key fob. Removable cap prevents from accidental button presses.

Options:

• Dynamic code pendants operate set/ turn off the safe condition, Keelock Microchip, (USA).
• Set/turn off the safe condition with record over keys DALLAS Touch Memory (USA).
• The code of set/turn off the safe condition of the car is dynamically change able.
• There is an inside immobilizer.
• You can set or turn off the safe condition in case of emergency. If there are no keys, use your pin code.
• There is double deck hit actuator.
• There is an automatic security mode.
• The security mode is available from the staff or additional alarm when using X module.
• There is digital relay actua tor of operating the hood lock.
• There are four programmed low voltage out puts.
• The support of the remote start.
• Security with engine on.
• You can set an immediate quiet security.
• You can turn off the hit actuator in security mode.
• You can connect an external actuator.
• There is distanced engine blockage function.
• There is «PANIC» function or «ALARM BUTTON».
• There are different areas of the hood, doors and the boot security.
• There are different signals when the hit actuator turns on.
• There is the «VALET» mode, service mode.
• There is an alarm because of some broken parts in the security system.
• There is the bypass regime of the broken areas.
• There is a regime of light delay in passenger compartment.
• The alarm time is limited.
• There is sound indication of the reasons of noise.
• The programming of the keys and pendants TM is separate.
• There is memory about the keys TM condition when it is power supply shutdown.
• There are only two steps when taking off the security.
• There are colored alarm power outputs.
• There are programmed power central lock out puts.
• The operation of the additional modules with MULT tire.

Delivery set:

• the master unit of digital system 1 pcs;
• the master key Touch Memory (TM) DS 1990 – 1 pcs;
• the staff (user) key Touch Memory DS 1971 – 1 pcs;
• multicolored LED condition display – 1 pcs;
• PIN button – 1 pcs;
• the scanner of the key «Touch Memory» – 1 pcs;
• the connection binder with safety appliance – 1 pcs;
• installation guide/user manual;
• digital relay actuator for the hood locker operation – 1 pcs;
• the hood proximity switch (the hood actuator) – 2 pcs.