English
Русско
Deutsch
Español
Português
Français
Türk
Italiano
Nederlands
हिन्दी
Bahasa Indonesia
Bimetal Thermometer 2012-09-10 15:03:14
Material Of Case, Cover, And Part Of Connection AISI 304 Sensitive Stem Material AISI 304 or AISI 316 Dial Scale Plate Aluminium - white background with black figures & marks ...
Bimetal Thermometers 2012-09-10 15:02:57
Material Of Case, Cover, And Part Of Connection AISI 304 Sensitive Stem Material AISI 304 or AISI 316 Dial Scale Plate Aluminium - white background with black figures & marks T ...
Bi-Metal Thermometers 2012-09-10 15:02:39
Material Of Case, Cover, And Part Of Connection AISI 304 Sensitive Stem Material AISI 304 or AISI 316 Dial Scale Plate Aluminium - white background with black figures & marks ...
Gas Gauge 2012-09-10 14:42:23
If the temperature of the pressure medium at the point where it is measured deviates from the operating temperature specified for the pressure guage, then a sufficiently high pressure guage, a sip ...
Gas Gauge 2012-09-10 14:42:04
The pressure guage needs to be mounted at the proper position so that it will not be subjected to vibration for accurate dial reading. For low and negative pressure measurements on clean and non ...
Gas Gauges 2012-09-10 14:41:39
For sealing connections with a parallel thread, for example, flat gaskets or profile seals must be fitted or on the other hand, the corresponding sealing lens to be provided on case of high pressu ...
Calibration Pressure Gauges 2012-09-10 14:58:46
For corrosive environment and fiuids, can be used on equipments with vibrations and high dynamic pressure loads, no formation of condensation. Such as food processing and petrochemical equipments. ...
Calibration Pressure Gauge 2012-09-10 14:57:23
With NPT thread the pressure seal is normally made by the fitting of the thread, but it is common practice to apply material to the male thread before assembly. For corrosive environment and fiui ...
Vacuum Pressure Gauges 2012-09-10 14:57:41
All pressure gauges sealed for the purpose of liquid-filling have a device to assure atmospheric compensation. A sticker glued on the case shows how to open after installation. See illustration be ...
Vacuum Pressure Gauge 2012-09-10 14:58:15
For corrosive environment and fiuids, can be used on equipments with vibrations and high dynamic pressure loads, no formation of condensation. Such as food processing and petrochemical equipments. ...
Oxygen Pressure Gauge 2012-09-10 14:53:56
When tightening direct mounting gauge, one should have a tightening torque applied to the connection by means of a spanner, to prevent damaging the gauge. For gases, pressurized gases (oxygen, ai ...
Oxygen Gauges 2012-09-10 14:53:33
When a guage incorporates a blow-out device or blow-out back, a minimun distance of 20 mm from any obstacle shall be ensured. Product Specifications Dimension 100mm Accuracy Class ± 1.0% ...
Air Pressure Gauge 2012-09-10 14:51:54
Before installing a pressure gauge, consideration should be given to temperature, humidity, vibration, pulsation, shock and other climatic and ambient conditions of the service application, and to ...
Gas Pressure Gauge 2012-09-10 14:51:34
Do not tighten by grasping the case of the gauge as this may cause damage. For gases, pressurized gases (oxygen, air ect.) and low viscosity liquids up to 60 degrees celcius, with liquid filling f ...
Gas Pressure Gauges 2012-09-10 14:51:10
Distributors / Suppliers are legally responsible for goods supplied into the application. This also means the Manufacturer has the right to know every detail about the application before taking an ...
Industrial Pressure Gauges 2012-09-10 14:41:17
The repair of pressure guage should leave to skilled staff. Generally, pressure guages will not require any maintainance. These instruments may only be repaired by the manufacturer. For low and n ...
Micro Pressure Gauges 2012-09-10 14:40:57
When using hazardous pressure media, for example, oxygen, acetylene, combustible substances, toxic substance, as well as refrigeration units, compressors etc. the applicable regulations must be ob ...
Gauges Pressure 2012-09-10 14:40:39
When selecting pressure gauges the selection criteria and installation recommendations provided here must be observed. The use of pressure gauges which do not meet the requirements encountered in ...
Gauge Pressure 2012-03-27 16:56:20
For low and negative pressure measurements on clean and non corrosive gases. Convenient for measuring gas circuits or pharmaceutical equipments. Product Specifications Dimension 63mm , ...
Pressure Gauges 2012-09-10 14:40:21
The operation pressure should be in the mid-third of the pressure range specified for the gauge. The maximum pressure load shold not exceed 75% of full scale value at static load, or 65% of full s ...
Filled Pressure Gauges 2013-02-01 10:41:09
When the installation is completed, start the device for measuring point slowly in order to avoid sudden pressure spikes during start-up and cause damage to the gauge. For gases, pressurized gase ...
Stainless Steel Pressure Gauge 2012-03-27 17:26:13
For corrosive atmospheres and fluids, resistant to high dynamic pressure loads and vibrations. Well suited for the process industry applications including: Petrochemical, Chemical plants, and ener ...
Steel Gauges 2012-09-10 14:55:01
Well suited for the process industry applications including: Petrochemical, Chemical plants, and energy etc. For corrosive atmospheres and fluids, resistant to high dynamic pressure loads and vib ...
Filled Pressure Gauge 2012-09-10 14:49:15
The Manufacturer provides one year of warranty for compliance of goods. In case of defective goods being claimed, Distributor / Suppliers are to fax a copy of claim document & description of c ...
Stainless Gauges 2012-09-10 14:55:24
The different screw threads are parallel thread with symbol BSP or G, according to ISO 228-1, and taper pipe threads with symbol NPT according to ANSI/ASME B1.20.1. Of course are other threads lik ...
Filled Gauges 2013-02-01 10:41:54
The Manufacturer is responsible for compliance of goods before leaving the factory. In case of defective caused be material, or production errors, the manufacturer is responsible to provide swift ...
Stainless Gauge 2012-09-10 14:56:09
For corrosive atmospheres and fluids, resistant to high dynamic pressure loads and vibrations. With parallel thread the pressure seal is made on the sealing face using a sealing washer which is co ...
Bourdon Tube Pressure Gage 2012-09-10 14:50:22
Dimension 63mm Accuracy Class ± 1.5% Pressure Range -1/0 to -1/+20 kg/cm² (bar) 0/1 to 0/1000 kg/cm² (bar) Operating Temperature Working temperature: 60 ℃ A ...
Stainless Steel Pressure Gauges 2012-09-10 14:56:40
Well suited for the process industry applications inluding: Petrochemical, Chemical plants, and energy etc. The repair of pressure guage should leave to skilled staff. Generally, pressure guag ...
Industrial Thermometers 2012-09-10 15:00:38
And where appropriate relays are incorporated in the installation circuit, contacts will turn ''ON'' or ''OFF'' electric motors, heaters, valves, etc. Thermometers with contactor have made pos ...