Solar Mounting Rack
Item No.: | Roof Type-01 |
-SUNUP-R – Mounted on tiled rooftop, wavy steel rooftop, and slat rooftop
-Weight: only 15kgs for 1 KW PV module on ground type. It’s light, easy and quick to assemble.
-Material: made by 6063-T5 aluminum with anodized treatment for salt resistance on offshore area
-Strong Structure: Firm up the solar panels with six locking plates to strengthen the structure.
Clamp design for fixing on the roof, without destroying the roof construction
-Protruding Rim Design: to locate PV panels in a row. Not only save more time and manpower, but also look shipshape.
-Wide Application: suit to 30 mm~50 mm thickness size solar panel
-Saving Cost: To use Hengs’s Aluminum Mounting Rack, the Labor assembly cost can be reduced 50%, the working schedule can be reduced 30%, and the material and transportation cost can be reduced 20% base on compare with galvanized steel mounting rack.
Specification
Positive Pressure |
P=139Kg/M2 |
Material |
Aluminum-alloy 6063-T5 |
Negative Pressure |
P= -144Kg/M2 |
External treatment |
Anodized Treatment > 7µ+ Acrylic coating >7 µ |
Maximum Axial Force |
Pmax=142.75kg |
Screw |
304# stainless steel screw |
Safe Load Limit |
5000kg |
Strength of Wind Resistance |
max. 55m/s (Authenticated by registered structure engineer) |
Maximum Shear |
420kg |
Assembly Efficiency |
about 1KW = 1 hourly performance per technician |
Coefficient of Linear Expansion |
2.16*10-5 |
Weight |
18kg/KW |
Warranty |
5 years |
Suitable Latitude |
0-45 |
Completed Project
Project Name: Okinawa Mounting Rack (Roof)
Capacity : 50KW * 48 location
Location : Okinawa, Japan
Power Out: March 2014