English
Русско
Deutsch
Español
Português
Français
Türk
Italiano
Nederlands
हिन्दी
Bahasa Indonesia
Dissolved air flotation system
| Item No.: | DAFS-5 |
Supplier Details
Country: Taiwan
City: New Taipei City 242
Address: 8F.,No.354, Huacheng Rd.,Xinzhuang Dist
TEL: +886-2-22769961
Fax: +886-2-22769962
Online Showroom:
37 Products
Dissolved air flotaion system
General Description (Refer to Pic. 1)
Dissolved air flotation system is an advanced equipment combined flotation and settling functions. High surface loading, short retention time and shallow water depth were uniqueness of this system compared to the conventional designs.
Feature
1. Flotation cell
2. Central rotation bearing
3. Influent distributor
4. Distribution rack
5. Clear water discharge pipe
6. Clear water outlet tank
7. Discharge weir
8. Levelling facility
9. Operating platform
10. Surface scraper and driver
11. Rotation driver
12. Sight glass
13. Slipring
Theory (Refer to Dw. 1)
The air is pressurized to be dissolved in the Air Dissolving Tube, and the fine bubbles will be released when it is discharged into the open basin.
The diameter of fine bubble is 1μm approximately and the flotation velocity is about 15cm/min. The floc in the solution will be attached by fine bubbles and floated to the top of water. The flotation process will be completed within 3 minutes and consistency of buoyant sludge is 2-3% solid content.
Outline Dimension (Refer to Dw. 3 & Table1)
General Description (Refer to Pic. 1)
Dissolved air flotation system is an advanced equipment combined flotation and settling functions. High surface loading, short retention time and shallow water depth were uniqueness of this system compared to the conventional designs.
Feature
1. Flotation cell
2. Central rotation bearing
3. Influent distributor
4. Distribution rack
5. Clear water discharge pipe
6. Clear water outlet tank
7. Discharge weir
8. Levelling facility
9. Operating platform
10. Surface scraper and driver
11. Rotation driver
12. Sight glass
13. Slipring
Theory (Refer to Dw. 1)
The air is pressurized to be dissolved in the Air Dissolving Tube, and the fine bubbles will be released when it is discharged into the open basin.
The diameter of fine bubble is 1μm approximately and the flotation velocity is about 15cm/min. The floc in the solution will be attached by fine bubbles and floated to the top of water. The flotation process will be completed within 3 minutes and consistency of buoyant sludge is 2-3% solid content.
Outline Dimension (Refer to Dw. 3 & Table1)