English
中文繁體
Русско
Deutsch
Español
Português
Français
Türk
Italiano
Nederlands
हिन्दी
Bahasa Indonesia
Tiếng Việt
Wire And Cable Extrusion-5
| Item No.: | 5-5 |
Supplier Details
Country: Taiwan
City: New Taipei City 231
Address: No. 17, Ln. 42, Baoxing Rd., Xindian Dist.
TEL: +886-2-29181558
Fax: +886-2-29188158
Online Showroom:
40 Products
Wire and Cable Extrusion – PVC Extrusion
The most common problems in extruding PVC plastics are bad mixing resulting in rough surface, toad skin, and matte surface. Poor design results in temperature rise or high production temperature, which leads to plastic cracking, and corrosive hydrochloric acid gas is generated to scorch the surface of the screw and paste incompletely extruded plastic.
The excellent screw and barrel design can achieve the four major elements, including perfect mixing, no temperature rise, high production capacity, and good production stability.
In our experience:
65mm extruder motor configuration 40KW, the production capacity of extruding PVC can reach about 210kg/H
90mm extruder motor configuration 75KW, the production capacity of extruding PVC can reach about 500kg/H
Enlarging the motor can effectively increase the extrusion capacity.
Our company has been designing and manufacturing screws and barrels since 1989, and has rich experience and ability to solve problems for customers. In response to the customer's extrusion problems, we can help redesign through the data of the test run, and propose customized improvement plans. Increase the extrusion capacity and improve the production efficiency, as well as the extrusion quality and durability.
The most common problems in extruding PVC plastics are bad mixing resulting in rough surface, toad skin, and matte surface. Poor design results in temperature rise or high production temperature, which leads to plastic cracking, and corrosive hydrochloric acid gas is generated to scorch the surface of the screw and paste incompletely extruded plastic.
The excellent screw and barrel design can achieve the four major elements, including perfect mixing, no temperature rise, high production capacity, and good production stability.
In our experience:
65mm extruder motor configuration 40KW, the production capacity of extruding PVC can reach about 210kg/H
90mm extruder motor configuration 75KW, the production capacity of extruding PVC can reach about 500kg/H
Enlarging the motor can effectively increase the extrusion capacity.
Our company has been designing and manufacturing screws and barrels since 1989, and has rich experience and ability to solve problems for customers. In response to the customer's extrusion problems, we can help redesign through the data of the test run, and propose customized improvement plans. Increase the extrusion capacity and improve the production efficiency, as well as the extrusion quality and durability.