Membrane Elements

Item No.:

Supplier Details

E-ROTEK WATER SYSTEMS CO.,LTD

Country: Taiwan

City: Pingtung County 900

Address: No.2,S. 1st Rd., Pingtung City

TEL: +886-8-7511181

Fax: +886-8-7513525

Online Showroom: 64 Products

Product Details Supplier Profile

UltraFiltration (UF) Membrane Elements

UF and RO (NF) are all pressure-driven membrane separation process. UF filter media is UF membrane, configured as flat type, tubular type and hollow fiber type. UF process is the separation process in relation with pore size, and the pore size is between RO (NF) and MF (0.001-0.1μm),that is to say UF process the separation from big molecules to small molecules. In short, ions and small molecules, dissolved in the raw water, permeate to be the UF permeate, while particles larger than the membrane pore size are concentrated as concentrate, such as big protein molecules, microorganism, colloid, suspending substance etc.

PERFORMANCE	5040SM MODULE
Maximum Allow Pressure (MPa)	0.6
Trans-membrane Pressure (MPa)	0.2
Normal Operation Pressure (MPa)	0.1-0.2
Backwash Pressure (MPa)	0.1
PH Value	2-10
Max Allowable Concentration of Free Chlorine (Long Term) (mg/L)	50
Max Allowable Concentration of Free Chlorine (Short Term) (mg/L)	<300
Operation Mode	Cross-flow or Dead-end
Max Operating Temperature (℃)	<40
Membrane Characteristics	Hydrophilic Double skin
Membrane Material	PAN
MWCO (Dalton)	50,000
Membrane Area (m²)	2.5
Fiber Internal Diameter (mm)	1.0
Fiber External Diameter (mm)	1.6
Number of Hollow-Fiber (piece)	2000
Membrane Module Size (mm)	Φ120×1048
Inlet and Outlet Point Diameter (mm)	DN25
Max Air Pressure for Integrity Test (MPa)	0.2
Flux(0.1MPa,25℃)	1T/H

PERFORMANCE	Φ200×1350 MODULE
Maximum Allow Pressure (MPa)	0.6
Trans-membrane Pressure (MPa)	0.2
Normal Operation Pressure (MPa)	0.1-0.2
Backwash Pressure (MPa)	0.1
PH Value	2-10
Max Allowable Concentration of Free Chlorine (Long Term) (mg/L)	50
Max Allowable Concentration of Free Chlorine (Short Term) (mg/L)	<300
Operation Mode	Cross-flow or Dead-end
Max Operating Temperature (℃)	<40
Membrane Characteristics	Hydrophilic Double skin
Membrane Material	PAN
MWCO (Dalton)	50,000
Membrane Area (m²)	25
Fiber Internal Diameter (mm)	1.0
Fiber External Diameter (mm)	1.6
Number of Hollow-Fiber (piece)	7500
Membrane Module Size (mm)	Φ200×1350
Inlet and Outlet Point Diameter (mm)	DN40
Max Air Pressure for Integrity Test (MPa)	0.2
Flux(0.1MPa,25℃)	4T/H

PERFORMANCE	Φ90×1260MODULE
Maximum Allow Pressure (MPa)	0.6
Trans-membrane Pressure (MPa)	0.2
Normal Operation Pressure (MPa)	0.1-0.2
Backwash Pressure (MPa)	0.1
PH Value	2-10
Max Allowable Concentration of Free Chlorine (Long Term) (mg/L)	50
Max Allowable Concentration of Free Chlorine (Short Term) (mg/L)	<300
Operation Mode	Cross-flow or Dead-end
Max Operating Temperature (℃)	<45
Membrane Characteristics	Hydrophilic Double skin
Membrane Material	PAN
MWCO (Dalton)	50,000
Membrane Area (m²)	50
Fiber Internal Diameter (mm)	1.0
Fiber External Diameter (mm)	1.6
Number of Hollow-Fiber (piece)	12000
Membrane Module Size (mm)	Φ250×1715
Inlet and Outlet Point Diameter (mm)	2"
Max Air Pressure for Integrity Test (MPa)	0.2
Flux(0.1MPa,25℃)	10T/H

The ROTEK group was established by a group of water treatment professionals in 1990. We have consolidated multiple partnerships worldwide and grown our customer base to cover more than 30 countries for our consulting, planning, water resource management and comprehensive support services. Customer satisfaction is at the core of our group philosophy. ROTEK manufactures commercial and industrial reverse osmosis systems that range in size from 50 gallons per day to over a million gallons. Complete packaged systems are available which include all pre-treatment stages with ultra-filtration, carbon filters, water softeners and iron removal filters, as well as post-treatment using UV, electro-deionization and corona discharge ozone systems. Our years of hands-on experience enable us to provide innovative and cost effective purified water solutions. We pride ourselves on providing clients with the lowest lifecycle costs, the highest quality and the most responsive service in the water treatment industry. We have products, technologies, experience and knowledge to support your needs. Our attention to detail has made the ROTEK group a leading manufacturer and distributor in this industry. OUR ADVANTAGES 1. A Single Source Supplier You Can Trust Our broad range of water and wastewater treatment systems gives us the ability to offer you one or multiple technologies that can be integrated into a total water solution meeting specific project requirements. From small components to large systems, we are capable of providing competitive pricing with a quality product that best suits your application. 2. Unparalleled Global Sourcing As a worldwide designer and supplier of water and wastewater treatment systems and services, we have developed a global sourcing network to deliver maximum value through the elimination of non-value-added expense. 3. Flexible OEM/ODM Service Here at ROTEK, we believe that standard products are not always suitable to meet your demands. In order to better service those needs, ROTEK has an extensive OEM/ODM service where you can customize a design, and see it through to production with the help of our highly specialized OEM/ODM team.

Home » Product Directory » Environment » Water Treatment » Water Treatment Parts » Membrane Elements

Membrane Elements

Membrane Elements