When this product is the use of water particles evaporate from a liquid into a gas, it needs to absorb
a lot of heat to achieve the cooling effect. In the evaporation process, from a liquid into a gas, the
water will absorb a large amount of heat in the air, water vapor will evaporate. Not only reduces the
ambient temperature, simultaneously, produce localized high pressure, air convection is formed, and
then the hot air away, to reduce the effect of air temperature. This cool way, not only fast and efficient,
and more importantly, the cost is very low.
Factors Influencing the water molecules evaporate
1. The size of water molecules, the water molecules in the particle size is less than 30μ, before they can
float between air, floating longer, more complete evaporation.
2. The uniformity of the water molecules, the water molecules smaller than 30μ percentage, the higher
the percentage of completely evaporated.
3. The nozzle spray angle, the angle, the more wide spread range, the higher the evaporation efficiency.
4. The relative humidity in the air, when the air relative humidity exceeds 85%, the rate of evaporation
of water molecules becomes poor, and therefore, environmental air circulation is very important.
The product quality is excellent, the resulting particles are very uniform out of the water, more than an
average of 90% of the water particles are smaller than 25μ, floating in the air very long, so the effective
evaporation percentage is particularly high, the cooling effect is particularly good.
Humidifier ejected mist, regardless of the particle, no matter how fine, its natural diffusion effect is very
limited, often resulting in a localized area, the relative humidity is high, and even cause the phenomenon
damp ground. If you can use along with a fan, increasing the diffusion humidifier mist particles, the
cooling effect can make the environment more effectively. Inverter micromist humidifier can be used
alone or in combination with the use of fans with better results can be obtained, for outdoor cooling
and indoor humidity.
Cooling fan is the use of high-performance mist to reduce the ambient temperature, use a fan to
increase air flow resistance, to achieve rapid reduce the ambient temperature of the best tools. Tung
Tai misting cooling fan, after Institute of Aerospace Engineering, National Cheng Kung University  
particle test, 90% of the mist particle size of less than 25μ, almost one hundred percent efficiency of
evaporation, cooling effect is very significant.