PEEK Bolts
Item No.: | PEEK Hex Bolts |
Supplier Details
Country: Taiwan
City: New Taipei City 23869
Address: NO.31, Gong-Sing-ST., Shulin Dist
TEL: +886-8688-8999
Fax: +886-8688-8998

Online Showroom:
49 Products
Link Upon has experience in making plastic screws for 20 years. Link Upon’s broad experience and expertise enables us serving applications in aircraft, aerospace, semiconductor, oil and gas, medical and industrial fields.
PEEK is a high performance engineering thermoplastic which is short for Poly Ether Ketone.
Link Upon PEEK Hexagon Bolts:
Specification table:
Hexagon head bolt
The specification table is our stock sales only, if you need other sizes, please contact with us.
Black spots may appear on the external surface. However, this has no impact on performance.
Gate residue of screw head is <=0.2mm
Since pitch misalignment of screw may happen during molding, use with a nut to compensate for thread molding pitch errors. When a nut is not used, it is recommended that the overlap of mating screw threads be shorter than 20 mm.
Heat resistance and chemical resistance changes depending on use conditions, make sure to test under actual use conditions beforehand.
Discoloration to some extent may occur depending on lot and possible various conditions.
Package: plastic bag sealed, standard export carton.

PEEK is a high performance engineering thermoplastic which is short for Poly Ether Ketone.
Link Upon PEEK Hexagon Bolts:
- Dimensional stability
- High tensile
- Chemical stability
- High temperature resistant
- High abrasion resistant
- High fatigue resistant
- Suitable for contact with food
Specification table:
Hexagon head bolt
SPEC | M4 | M5 | M6 | M8 | M10 | M12 | M16 |
5 | | V | | | | | |
7 | | | V | | | | |
8 | | V | V | V | | | |
10 | | V | V | V | | | |
12 | | V | V | | | | |
15 | V | V | V | V | | V | |
16 | | | V | V | | | |
18 | | | | V | | | |
20 | | V | V | V | V | | |
25 | | V | V | V | V | V | |
28 | | | | V | | | |
30 | | V | V | V | V | V | |
35 | | | V | V | V | V | |
40 | | | V | V | V | V | |
45 | | | | V | | | |
50 | | | | | | | V |

The specification table is our stock sales only, if you need other sizes, please contact with us.
Black spots may appear on the external surface. However, this has no impact on performance.
Gate residue of screw head is <=0.2mm
Since pitch misalignment of screw may happen during molding, use with a nut to compensate for thread molding pitch errors. When a nut is not used, it is recommended that the overlap of mating screw threads be shorter than 20 mm.
Heat resistance and chemical resistance changes depending on use conditions, make sure to test under actual use conditions beforehand.
Discoloration to some extent may occur depending on lot and possible various conditions.
Package: plastic bag sealed, standard export carton.
