Nozzle:          ∮0.2mm
Material:        Engineering Plastics
Features:        At 30 ℃, relative humidity of 50%, fluid pressure 30Bars environment。
Flow rate:       25 cc / min
Spray angle      85 ° - 105 °
Mist particles:  90% of the particles are less than 25μm 

Special structural design, after 10,000 hours of practical test, still jet normal,  There will not have
any lime scale of clogging.
At 30 ℃, 50% relative humidity environment, floating in the air distance is about 1.5 meters, nearly
over 90% particles can be converted into water vapor. 
Groundwater or recycled water can also be used as fogging water, after summarily filtered to remove
larger than 0.06mm solid materials.
The high pressure nozzle has been  criticized the most by users, is the lime scale of the blockage,
causing damage to the entire system. In order to prevent the formation of scale, the use of water
throughout the system, are used the RO water-treated pure water. This is not environmentally friendly
and wasting water. Especially in dry areas, in such a way to cool down, is absolutely incorrect.
The formation of scale, there must be a rough surface, before adhering lime scale. After the metal
surface due to oxidation to form a rough surface, the metal surface will begin to produce crystalline
lime scale. Therefore, as long as we avoid the use of metal materials, there will not be any formation
of scale, and clogging phenomenon.
Since it will not have any scale, the use of water will not need consider too much, whether groundwater,  
rainwater, or even recycled water can be  just through a simple filter to get rid of the solid material in
the water, you can use it as fogging water. This not only greatly reduce the expense of water, but also
more environmentally friendly and fit the green energy requirements.