Motorcycle Tracker
Item No.: | MGT-388 |
MGT-388(GTR-388E12) is designed as a durable and multi-functional 3G GPS tracker. It integrates highly sensitive GPS module and 3G communication module with a powerful microcontroller that fits into a compact enclosure. The device is capable of being waterproof and ideal for use in a motorcycle, golf carts and vehicles. It provides real-time GPS positions anytime and anywhere with an open view to the sky, and offers precise positioning, and reports vehicle status to the server with necessary information shown on the map. Benefits such as enhanced fleet management, improved vehicle safety, emergency response, are all accomplished through the implementation of the system. The built-in 3G and GPS antennas are for easy installation without hassle.
Features
Dual-Band UMTS/HSDPA WCDMA system
Dual-Band GSM/GPRS/EDGE system
820mAh rechargeable battery
High Sensitivity GPS Receiver
Compact size and Waterproof IPX7 design
Built-in high sensitivity GPS/GSM antennas.
Built-in motion sensor
AGPS support
Support communication protocols- SMS/TCP/UDP/HTTP
Multiple I/Os support:
1 Digital Input for custom function
1 Digital input for optional Emergency button
1 Analog Input
1 Digital Output for Relay
1 Digital Input for ACC detection.
Configuration and firmware update via Over-The-Air.
Small size for easy installation
Perfect power management control
Thermal solution with IPX7 design and waterproof cable connector
Specification
Item |
Description |
|
Model |
MGT-388(GTR-388E12) |
|
Back-up Battery |
Li-Polymer 820mAh |
|
emperature |
Operation |
-30℃ ~ + 60℃ |
Storage |
-40℃ ~ + 60℃ |
|
Dimension |
107.5 mm X 38.7 mm X 23.5 mm |
|
GPS receiver |
high performance GPS chipset |
|
Communication |
GSM/GPRS/EDGE:900/1800MHz |
|
GPS Antenna |
Built-in patch ceramics antenna |
|
GSM Antenna |
Built-in Pi-Fa antenna |
|
Protocol |
SMS/GPRS (TCP/UDP) |
|
Power |
9V~36V |
|
Built-in Memory |
32 Mb |
|
Emergency Input |
Negative trigger x 1 |
|
Ignition (ACC) Input |
Positive trigger x 1 |
|
Digital Input Port |
Negative trigger x 1 |
|
Digital Output Port |
Negative trigger x 1 (300 mA) |
|
Fuel sensor Input Port |
Analog Input x 1( 0~28V), 12 bits resolution |
|
Sensor |
Motion sensor |
|
Humidity |
5% to 95% Non-Condensing |
|
Weight |
66.5g |
MGT-388 could be placed or installed on the marked position as the pictures below.
If you’d like to install MGT-388 at the OBDII connector of vehicles, please connect MGT-388 with the OBDII power cable firstly, then you could connect the OBDII power cable to the OBDII connector of vehicle as the picture below.
For Motorcycle
For motorcycle rider, MGT-388 could be installed at the marked position as the picture as below.