Configurable Mifare® (MAD) Sector Reader

Introduction:

LBR300 is an user configurable Mifare® sector data reader. It can be configured to read Mifare® card with MAD1/MAD2 standard in a Mifare® application open system, or can be configured to read the user-defined sector data (Non-MAD) in a user defined closed system. Output interface can be configured as an RS232 output,or Wiegand output or MSR ABA TK2.

LBR300 also can be set with a Reader ID number for multi-unit communication.

Features:

·Possible to be installed on metal surface
·Supports MAD1/MAD2 standard and customer MAD-AID setting
·Supports Non-MAD format with user-defined sector number.
·Supports Multi Sectors
·Reads Mifare® Standard 4K or Mifare® Standard 1K card
·Sets Reader ID number for multi-link application
·Three output interfaces: Wiegand (Default), RS232 and MSR ABA TK2
·Wiegand output is selectable from 26 bits to 128 bits
·RS232 output packet can be set with Header, Reader ID and trailer
·Internal LED and buzzer are configurable
· Weather resistant

※ Mifare is a registered trademark of Philips Electronics N.V.Applications:
·Access Control System
·Time attendance
·Guest registration system
·Academic service
·Information service

Specifications:

Power Requirements	7.5 ~ 24 Volts ※ A linear regulator is recommended
Interface	Wiegand 26 bits ~ 128bits Selectable RS232, MSR ABA TK2
Card type	Mifare MF1 standard cards for 1024 / 4096 bytes
Maximum reading distance	Up to 50 mm with MFA01 card in ideal conditions
Frequency	13.56 MHz standard
Card format	MAD1 / MAD2
Audio / Visual Indication	LED/Buzzer indication
Dimensions	105mm × 105mm × 18mm
Housing material	ABS
Environment	Operating temperature 0 °C ~ + 60 °C Operating relative humidity 10~90%

Ordering information:
LBR300: Mifare Sector reader
※ Specification is subject to change without notice.