English
中文繁體
Русско
Deutsch
Español
Português
Français
Türk
Italiano
Nederlands
हिन्दी
Bahasa Indonesia
Tiếng Việt
Thermoplastic Injection Molding
| Item No.: | 3-2 |
Supplier Details
Country: Taiwan
City: Changhua County 508
Address: No. 168, Dongyuan Rd., Hemei Township
TEL: +886-4-7352156
Fax: +886-4-7331128
Online Showroom:
41 Products
The thermoplastic injection molding process is a standard process involving an aluminum mold with no heating or cooling lines running through it, which means cycle times are a bit longer. It allows our molders to monitor fill pressure, cosmetic concerns, and the basic quality of the parts.
An injection machine is made up of three primary components: the feed hopper, the screw and the heated barrel. Plastic granules for the part are fed into the heated barrel by a hopper.
Injection molding machine sizes can run anywhere from 5 tons of clamping force to over 6000. The higher the tonnage, the larger the machine. In fact, injection molding machines are classified based on tonnage, or more precisely the clamping force or pressure.
An injection machine is made up of three primary components: the feed hopper, the screw and the heated barrel. Plastic granules for the part are fed into the heated barrel by a hopper.
Injection molding machine sizes can run anywhere from 5 tons of clamping force to over 6000. The higher the tonnage, the larger the machine. In fact, injection molding machines are classified based on tonnage, or more precisely the clamping force or pressure.