English
中文繁體
Русско
Deutsch
Español
Português
Français
Türk
Italiano
Nederlands
हिन्दी
Bahasa Indonesia
Hard coating resin-RSH-100-S1
| Item No.: | RSH-100-S1 |
Supplier Details
Country: Taiwan
City: New Taipei City
Address: 7F., NO.3, GUIFENG ST., TAISHAN DIST., NEW TAIPEI CITY 24355, TAIWAN (R.O.C.)
TEL: +886-2-29010509
Fax: +886-2-29014616
Online Showroom:
68 Products
■ Product Features
1. Low rainbow pattern.
2. High hardness, wear resistance, suitable for lenses and mobile phones before the panel.
3. B value is low (less than 0.8), will not have yellowing problem.
4. miscible alcohols excellent for PC, PMMA, etc. fear of solvent coating material.
■ Resin Specifications
1.Chemical Composition: Acrylic resin
2.Physical Status: Fluid @ 25 ℃
3.Appearance: colorless transparent
4.Solid content: approach 99%
5.Viscosity (25 ℃): 6500 ± 100 cps
6.Gravity: 1.142
7.A glass transition temperature (Tg): 138 ℃ (calculated value)
■ Hardening conditions
1. The proposal to add a solvent: MEK or Toluene or IPA
2. It is recommended baking temperature: 80 ~ 85 ℃ sustained about 1.5 to 2 minutes.
3.UV wavelength of 365nm is irradiated for about 11 seconds (cumulative energy of approximately 350 ~ 400 mj / cm2).
1. Low rainbow pattern.
2. High hardness, wear resistance, suitable for lenses and mobile phones before the panel.
3. B value is low (less than 0.8), will not have yellowing problem.
4. miscible alcohols excellent for PC, PMMA, etc. fear of solvent coating material.
■ Resin Specifications
1.Chemical Composition: Acrylic resin
2.Physical Status: Fluid @ 25 ℃
3.Appearance: colorless transparent
4.Solid content: approach 99%
5.Viscosity (25 ℃): 6500 ± 100 cps
6.Gravity: 1.142
7.A glass transition temperature (Tg): 138 ℃ (calculated value)
■ Hardening conditions
1. The proposal to add a solvent: MEK or Toluene or IPA
2. It is recommended baking temperature: 80 ~ 85 ℃ sustained about 1.5 to 2 minutes.
3.UV wavelength of 365nm is irradiated for about 11 seconds (cumulative energy of approximately 350 ~ 400 mj / cm2).