English
Русско
Deutsch
Español
Português
Français
Türk
Italiano
Nederlands
हिन्दी
Bahasa Indonesia
Bourdon Tube Gauge 2012-09-10 14:50:42
The Manufacturer is responsible for compliance of goods before leaving the factory. In case of defective caused be material, or production errors, the manufacturer is responsible to provide swift ...
Threaded Thermowell 2013-02-01 10:31:56
For services at corrosive atmospheres or fluid elements, suitable casings and components made of corrosion resistant materials must be provided. Also special material may help to protect the outsi ...
Thermowells 2013-02-01 10:32:12
The Manufacturer is responsible for compliance of goods before leaving the factory. In case of defective caused be material, or production errors, the manufacturer is responsible to provide swift ...
Magnetic Pointer 2012-03-27 09:42:11
The mark pointer (Larger pointer) will stay at the maximum amplitude dial level during pressure rising, while the smaller pointer (Black pointer) is in movement with the pressure range. The mark ...
Air Pressure Gauges 2012-09-11 17:20:46
The user shall ensure that the correct gauge has been selected with the correct range and construction. For gases, pressurized gases (oxygen, air ect.) and low viscosity liquids up to 60 degrees c ...
Threaded Thermowells 2013-02-01 10:31:34
For bimetal thermometers with standard length-female thread diameter:1/4'' process M-connect: 1/2''), or other customized size required. Product Specifications Process Connec ...
Bourdon Pressure Gauge 2013-02-01 10:38:44
During installation or removal never apply any forces to the case of the pressure gauges, as it might affect the accuracy of the pressure gauge. For gases, pressurized gases (oxygen, air ect.) an ...
Thermowell 2013-02-01 10:32:25
Pressure connection The positions of the connections can be choosen in the technical sheets. Thread forms and sizes are as shown in the table below. The different screw threads are parallel thread ...
Bourdon Tube Pressure Gauges 2013-02-01 10:38:00
Before installation, the tapered threads (PT & NPT Threads) are to be sealed off with additional sealants like PTFE tape, for example. As fo PF & PS threads, it is recommended to use suita ...
Gauge Cover 2012-03-27 09:42:05
Apply in 2½'' and 4'' bottom and center back connection gauges, the covers were made of SBR Robber, Anti-abrasion, excellent flexibility, perfectly protect the gauges from heavily impact and bump ...
Digital Pressure Gauge 2012-03-27 17:23:45
1〞 Digital Pressure Gauge/Switch - High-accuracy: ±1% of F.S. - LCD Display (V.A. : 20.0 x 9.6 mm) - High Resolution: 1/3000 (Max.) - Multi Pressure Units: psi, bar, kg/cm2, KPa, MPa, inHg, cmHg, ...
Bourdon Pressure Gauges 2013-02-01 10:40:24
For gases, pressurized gases (oxygen, air ect.) and low viscosity liquids up to 60 degrees celcius, with liquid filling for measurement points subject to vibrations and high dynamic pressure loads ...
Micro Pressure Gauge 2012-09-10 14:39:39
Dimension 63mm , 75mm , 100mm Accuracy 63mm class ± 2.5 % 75mm class ± 1.5 % 100 mm class ± 1.5 % Pressure Range -300mm A ...
Bourdon Tube Gauges 2013-02-01 10:40:51
For pressure gauges with pressure relief vent at the top of the case it is recommended for pressure ranges lower than or equal (7 KG/CM2/100 PSI) to cut off the nipple at the filling plug so that ...
Bourdon Gauges 2013-02-01 10:38:31
During installation or removal of the lower back or center back mounting pressure gauge, do the same steps as point 10, in the case of flange joints or mounting bracket, the flanges are joined usi ...
Bourdon Tube Pressure Gauge 2013-02-01 10:38:15
During installation or removal of a lower mounting pressure gauge, apply the wrench flats provided. It must be ensured that the matching process connection has been selected (nominal width, suitab ...