English
中文繁體
Русско
Deutsch
Español
Português
Français
Türk
Italiano
Nederlands
हिन्दी
Bahasa Indonesia
Tiếng Việt
Flux For Aluminium Welding
| Item No.: | Alumax |
Supplier Details
Country: Taiwan
City: Chiayi City 600
Address: 1F., No. 33, Guangzhou St., West Dist.
TEL: +886-5-2852137
Fax: +--
Online Showroom:
39 Products
Welding flux
Alumax
TYPICAL APPLICATIONS
•Bicycle industry
•Air conditioning system
•Car cooling system
Directions
•First steps:
Base metals should be cleaned thoroughly to remove the surface dirt, grease and other impurities
Cleaning heavily oxidized surfaces may be applied other methods such as steam jet, wire brushing, or mechanical grinding
•Seconds steps:
Heat the end of filler metal rod and dip into flux, or sprinkle flux on work-piece, or can be mixed with water or methyl, ethyl or isopropyl alcohol to form a paste
•Third steps:
Continue heating until the flux liquefies and flows then fills the joint, producing shiny fillets
The flux wets the joining surfaces thoroughly and prevents the aluminum oxide inclusions in the joints
Alumax
TYPICAL APPLICATIONS
•Bicycle industry
•Air conditioning system
•Car cooling system
Directions
•First steps:
Base metals should be cleaned thoroughly to remove the surface dirt, grease and other impurities
Cleaning heavily oxidized surfaces may be applied other methods such as steam jet, wire brushing, or mechanical grinding
•Seconds steps:
Heat the end of filler metal rod and dip into flux, or sprinkle flux on work-piece, or can be mixed with water or methyl, ethyl or isopropyl alcohol to form a paste
•Third steps:
Continue heating until the flux liquefies and flows then fills the joint, producing shiny fillets
The flux wets the joining surfaces thoroughly and prevents the aluminum oxide inclusions in the joints