Essentials for filling powder pellets into aluminum foil bags
1. Adopt Japan TOPACK combined palm type vertical filling and packaging machine, longitudinal sealing and sealing after completion of the horizontal sealing, and then cutting the aluminum foil package.
2. This machine is equipped with a material tapping and cutting dust collector to reduce the adhesion of the powder to the aluminum foil and affect the sealing of the aluminum foil.
3. The factory has obtained ISO22000 and HACCP verification and is a professional powder filling factory. The controlled work area uses clean room compartments that meet food grade standards. The factory is planned to be a continuous production line. Each time only the same product is produced, the same plant will not produce two different products at the same time. Under the positive pressure HEPA circulating air flow, there is no risk of cross-contamination. The aluminum foil package packed in the control area will be directly transported to the outer packaging area by the conveyor belt, and can be manually put into the box or into the bag to avoid deformation and damage of the aluminum foil caused by excessive accumulation of the aluminum foil, and affect the product quality. The quotation of the box part is also increased due to the volume of the aluminum foil package, and the operation is more energy-intensive, and the quotation is also increased by 20~30%.
4. As the filling content increases, the production speed of the machine decreases, the number of replacement of aluminum foil rolls increases, and the cost of handling materials is also increased. The quotation is 20%~30% higher than that of ordinary aluminum foil filling.
5. The sample photo is 6μM aluminum foil, the specification is 10G/bag, and the finished aluminum foil size is 6X13.5CM, which is the longest specification that can be produced by this machine.
6. Daily production capacity: 20,000 packs