English
中文繁體
Русско
Deutsch
Español
Português
Français
Türk
Italiano
Nederlands
हिन्दी
Bahasa Indonesia
Tiếng Việt
Aluminium Bag
| Item No.: | 02-60-100-1 |
Supplier Details
Country: Taiwan
City: Tainan City
Address: No. 41, Aly. 43, Ln. 94, Sec. 4, Anhe Rd., Annan Dist.
TEL: +886-6-3557878
Fax: +886-6-3561893
Online Showroom:
47 Products
Essentials for filling powder pellets into aluminum foil bags
1. Adopt Japan TOPACK combined palm type vertical filling and packaging machine, longitudinal sealing and sealing after completion of the horizontal sealing, and then cutting the aluminum foil package.
2. This machine is equipped with a material tapping and cutting dust collector to reduce the adhesion of the powder to the aluminum foil and affect the sealing of the aluminum foil.
3. The factory has obtained ISO22000 and HACCP verification and is a professional powder filling factory. The controlled work area uses clean room compartments that meet food grade standards. The factory is planned to be a continuous production line. Each time only the same product is produced, the same plant will not produce two products at the same time. Under the positive pressure HEPA circulating air flow, there will be no risk of cross-contamination. The aluminum foil package packed in the control area will be directly transported to the outer packaging area by the conveyor belt, and can be manually put into the box or into the bag to avoid deformation and damage of the aluminum foil caused by excessive accumulation of the aluminum foil, and affect the product quality.
4. The sample photo is 6ΜM aluminum foil filled with cranberry collagen powder.
5. Specification 6G/bag, aluminum foil finished product size 6X10CM. The length of the foil package can be adjusted to a maximum of 13CM.
6. Daily production capacity: 20,000 packs
1. Adopt Japan TOPACK combined palm type vertical filling and packaging machine, longitudinal sealing and sealing after completion of the horizontal sealing, and then cutting the aluminum foil package.
2. This machine is equipped with a material tapping and cutting dust collector to reduce the adhesion of the powder to the aluminum foil and affect the sealing of the aluminum foil.
3. The factory has obtained ISO22000 and HACCP verification and is a professional powder filling factory. The controlled work area uses clean room compartments that meet food grade standards. The factory is planned to be a continuous production line. Each time only the same product is produced, the same plant will not produce two products at the same time. Under the positive pressure HEPA circulating air flow, there will be no risk of cross-contamination. The aluminum foil package packed in the control area will be directly transported to the outer packaging area by the conveyor belt, and can be manually put into the box or into the bag to avoid deformation and damage of the aluminum foil caused by excessive accumulation of the aluminum foil, and affect the product quality.
4. The sample photo is 6ΜM aluminum foil filled with cranberry collagen powder.
5. Specification 6G/bag, aluminum foil finished product size 6X10CM. The length of the foil package can be adjusted to a maximum of 13CM.
6. Daily production capacity: 20,000 packs