Hengs Technology Co., Ltd is exclusive agency in Taiwan Of Morningstar Charge Controller.
   
The charge Controller have been a vital component in a myriad of off-grid PV system.  It’s prevent that over charge and over loading by battery, and extend the battery using life. Moreover, the some charge controller have advanced function, like lighting controller PLC control, remote monitoring…etc. The Morningstar charge controller has good quality with 2-5 warranty.
The characteristic for Accessories of charge controller series
-Ground Fault Protection Device :  Morningstar’s Ground Fault Protection Device products are built to provide a superior solution to ground fault protection for both off-grid and on-grid PV systems.
-TirStar Digital Meter 2:  Model Numbers TS-M-2 Key Features and Benefits The meter will display a great deal of information about the TriStar controller and the operation of your system.
-RSC (EIA-485 to serial ) :  By converting to EIA-485, the RSC-1 allows up to 128 Morningstar products to communicate on the same communication bus and over much greater distances
-TriStar Remote Meter 2:  Model Numbers TS-RM-2 Key Features and Benefits The meter will display a great deal of information about the TriStar controller and the operation of your system
-MeterHub: Enables multiple controllers to share a single TriStar meter and display both single controller data (TriStar #1, TriStar #2…) as well as aggregated data for the entire system
-Remote Meter:  Morningstar’s Remote Meter (RM-1) is a universal, four digit display with custom icons that is compatible with several Morningstar controllers and inverters
-Relay Driver: Morningstar’s RelayDriver™ is a logic module which provides high level system control functions such as high/low voltage alarms, load control and generator start
-Remote Temperature Sensor : The RTS is recommended whenever the temperature of the battery varies more than 5°C (9°F) during the year
-PC MeterBus Adapter: Key Features and Benefits Morningstar’s PC Meterbus Adapter (MSC) converts a controller’s meter port (RJ-11 phone type connector) to a standard RS-232 serial connector for connection to a PC or other equipment
-DIN Rail Clips These rugged plastic clips have been custom made to match the mounting holes on the SunSaver controllers and to either snap on to the middle of the rail or to slide on from the end of the rail. The clips also provide a mechanism to allow easy rem

Specification
 

ACCESSORIES
Model No.
DIN-1	DIN Rail Mounting Clips  (2 clips required per controller).  For use with: SunLight, SunSaver, SunSaver Duo or SS-MPPT controllers
GFPD-150V NEW!	Ground Fault Protection Device for 150 volt.   For use with: All TS-MPPT below 600 V.
GFPD-600V  NEW!	Ground Fault Protection Device for 600 volt.   For use with: TS-MPPT-600V only
HUB-1	MeterHub.   For use with: SS-MPPT, TS, TS-MPPT, TS-M-2, TS-RM-2 or Relay Driver (RD-1)
MSC	PC Meterbus Adapter.   For use with: SunSaver Duo, SS-MPPT or SureSine Inverter
RD-1	Relay Driver.  For use with: TriStar, TS-MPPT or other systems
RM-1	Remote Meter.   For use with: SunSaver Duo, SunSaver MPPT or SureSine Inverter
RSC-1	EIA-485/RS-232 Communications Adapter.   For use with: Any device with a RS-232 port; converts port to EIA-485 serial connector
RTS	Remote Temperature Sensor.   For use with: ProStar, SunKeeper, SS-Duo, SS-MPPT, TS, TS-MPPT (included with TS-MPPT)
TS-M-2	TriStar Digital Meter.   For use with: TS-45 & 60 and TS-MPPT-45 & 60
TS-M-2-600V  NEW!	TriStar Digital Meter,  for 600V.   For use with: TS-MPPT-600V only
TS-RM-2	TriStar Remote Digital Meter.   For use with: ALL TS, TS-MPPT, and TS-MPPT-600V